ET310A is the perfect combination of the 80M sampling rate 20MHz bandwidth Oscilloscope & auto-range TRMS multimeter! Uniquely, it can easily connect with computer to deal with the measuring datas and waveforms on large screen!
General characteristics:
Dimensions: 86mm X 186mm X 32mm
weight: 325g (excluding other accessories)
display: 128 x 128 dot matrix LCD
observation area: 72mm X 72mm
backlight: white, adjustable brightness, two levels
input resistance: 10MΩ
battery: 1000mAH lithium polymer battery
Charging time: 2-3h
working hours: about 10 hours
storage capacity: 100 sets DMM datas and 100 sets DSO waveforms
use environment: 0 ~ +40 degrees Celsius
storage conditions: -10 ~ +60 degrees Celsius
power adapter: 100V~250V switching power supply
one-key conversion to oscilloscope, one-key display of the measured waveforms.
Oscilloscope functions:
☑80M sampling rate, 20MHz bandwidth,1 channel
☑One-key conversion to oscilloscope, automatic display of waveforms
☑Manual/auto setting of V/div and t/div
☑Trigger mode: auto/normal/single
☑Auto measure: Vp-p, Vavg, Vrms, dBm
☑Cursor readout: dV, dt, 1/dt(frequency)
☑Storage 100 sets datas and 100 sets waveforms
☑Vertical Resolution: 8 bit
☑Software calibration technology, memory calibration factor
Multimeter functions:
☑4000 counts, auto-range, TRMS
☑DC Voltage: 1000V
☑AC Voltage(TRMS): 750V
☑DC Current: 20A
☑AC Current(TRMS): 20A
☑Resistance: 40MΩ
☑Capacitance: 51.2nF-100μF
☑Frequency: 5.12Hz-5.12MHz
☑Duty ratio: 0.1~99%(AC 1Vp-p)
☑Diode test, continuity test
Features:
* LCD display Oscilloscope and TRMS Multimeter in 1 lab meter, portable design, more convenient and cost-effective for user. Software calibration technology, memory calibration factor.
* Connectable to computer, large screen display, easily deal with the datas and waveforms.
* Oscilloscope functions: 80M sampling rate, 20MHz analog bandwidth, one-key oscilloscope, auto waveform capture, three trigger modes: single, normal, auto. Manual/auto setting of V/div and t/div. Auto measure: Vp-p, Vavg, Vrms, dBm. Cursor readout: dV, dt, 1/dt(frequency).
* Multimeter functions: 4000-counts, automatic range, TRMS, AC/DC voltage, AC/DC current, resistance, frequency, capacitance, diode test, duty ratio, continuity test.
* Display maximum value, minimum value, difference value and relative value on the same screen. Storage/readout 100 sets waveforms and 100 sets datas. Adjustable LED backlight, timed work available.